Canberra’s weather requires homes which are a cosy retreat in winter and a cool escape in summer without the sky-high energy bills.

 

The following are a few steps for choosing, installing, and maintaining a heating and cooling system that fits your home and budget.

 

Know your options

 

Most homes in Canberra do well with the reverse cycle system, also known as a heat pump. These are all-rounders, efficient at heating in chilly winters and cool during the dry summers.

 

The following are some options

 

  •  Split systems are ideal for a single room or an open plan area. These are a budget-friendly option and are pretty quick to install.

 

  •  Multi-split systems help you connect several indoor units to one outdoor unit. These are great for heating or cooling a few specific rooms at a certain time.

 

  • Ducted systems are discreet; the main unit is hidden in the roof, pumping air through the vents into multiple rooms for even comfort.

 

  •  Evaporative systems are the only option that works well in the dry heat and are pretty cheap. However, they won’t help you through the Canberra winter.

 

The ACT government offers rebates and upgrade programs like the Home Energy Support Program to lower the upfront cost; especially if you’re switching from an old gas system.

 

Getting started

 

  • Before you start looking at models, take a look at your house. Note the size and ceiling height of the main rooms and check whether the ceilings and walls are insulated. It will make a huge difference.

 

  •  Homes with big ceilings work well with ducted systems. However, you’ll have to think about roof access and where the ducts could run.

 

  •  A small home or an apartment is perfectly served by a couple of split systems.

 

  •  However, for larger family homes in Belconnen or Tuggeranong, a zone ducted system adds comforts and lowers the cost.

 

  • Sizing is everything; bigger is not actually better. An oversized unit will constantly turn on and off, resulting in short cycling that wastes energy and wears it out faster.

 

  •  On the other hand, an undersized unit might run nonstop and struggle to reach the desired temperature. Energy is wasted, driving up your bills.

 

Cost of a heating and cooling unit

 

  • A single split system is a modest investment. Although a full ducted system for a larger home is a bigger project.

 

  •  Get at least three quotes. Don’t just compare the bottom line, look at what’s included.

 

  •  Look for the details of the model, duct sealing, and commissioning. A cheap price upfront could mean expensive problems later.

 

Remember that placement matters; an outdoor unit needs space to breathe, away from the plant, and debris. The indoor unit should be placed for even air flow.

 

Look for stars; for Canberra climate and a high Energy Star rating is good, but specifically look for strong ratings on the split system. It means they will perform efficiently on a cold morning.

 

Finding the right heating and cooling for your home is about making informed choices. Pick a system that supports your home; partner with a licensed installer, and don’t waste money by forgetting to check for rebates. A little planning will bring you years of comfort and cost-effective living.